September 2025

Health & Fitness

The Complete ACFT Guide for Soldiers in 2025 (+ Free Score Calculator)

AsadAli

This is your one-stop, field-tested guide to the Army Combat Fitness Test (ACFT).
Use the official calculators, choose a plan, and pass with confidence.

 

Quick Start

 

1) What the ACFT Is (Plain English)

The Army Combat Fitness Test measures your combat-ready fitness.
It replaced the APFT.
It uses six events to test strength, power, speed, core, and endurance.

The six events are:

  1. 3-Rep Max Deadlift (MDL)
     
  2. Standing Power Throw (SPT)
     
  3. Hand-Release Push-Up (HRP)
     
  4. Sprint-Drag-Carry (SDC)
     
  5. Plank (PLK)
     
  6. Two-Mile Run (2MR)
     

Each event gives you points.
Your total is the sum of all six.
Your required numbers depend on your age and sex.
Open the ACFT Calculator Tool to get a clear target in seconds.

 

2) How Scoring Works (No Guessing)

You get a score for each event.
Better performance equals more points.
Your age and sex set your specific cut lines.
The fastest way to see your numbers is to use the calculators below.

Need the whole picture in one place?
Use the ACFT Standards Calculator and confirm ACFT Standards before you train.

3) Event-by-Event Guide (Technique → Scoring → Training)

Each sub-section gives you the test goal, fast technique cues, common errors, and the exact tools to use.

3.1 Deadlift (MDL) — Strength You Can Trust

What it tests: Lower-body strength and bracing.
Core idea: Hinge at the hips, keep the bar close, and drive through the floor.

Fast technique cues:

  • Brace first. Lock your ribs down and tighten your core.
     
  • Hips back, shins near vertical, lats on.
     
  • Push the ground away. Keep the bar path close.
     

Common mistakes (and fixes):

  • Rounded back: Lower the load and use tempo reps. Hold a strong brace.
     
  • Bar floats forward: Pull “back to the thighs.” Squeeze your armpits.
     
  • Yanking start: Take tension out of the bar before you pull.
     

Score it now:

Train it:

 

3.2 Standing Power Throw (SPT) — Power From the Ground Up

What it tests: Explosive hip drive and coordination.
Core idea: Load legs, snap hips, then release high and far.

Fast technique cues:

  • Long reach back, quick dip, tall finish.
     
  • Hips lead, arms follow.
     
  • Throw “up and out,” not only “out.”
     

Common mistakes (and fixes):

  • Arm-only throw: Use a small countermovement. Lead with legs and hips.
     
  • Rushed release: Practice rhythm with lighter medicine ball throws.
     
  • Flat trajectory: Finish tall and look slightly upward.
     

Score it now:

Train it:

 

3.3 Hand-Release Push-Up (HRP) — Total-Body Line

What it tests: Upper-body strength and trunk control.
Core idea: Keep a straight body line. Release hands cleanly at the bottom.

Fast technique cues:

  • Wrists under elbows.
     
  • Ribs down, glutes on, squeeze the floor.
     
  • Smooth cadence. No jerky reps.
     

Common mistakes (and fixes):

  • Sagging hips: Shorten sets. Stop a rep before you lose the line.
     
  • Flaring elbows: Tuck a bit. Aim elbows at 45°.
     
  • Bouncing chest: Use a full stop and controlled push.
     

Score it now:

Train it:

3.4 Sprint-Drag-Carry (SDC) — Speed With Skill

What it tests: Speed, agility, work capacity, and grip.
Core idea: Clean turns and tight transitions win seconds.

Fast technique cues:

  • Plan your turns. Eyes up.
     
  • Keep the sled pull straight and brisk.
     
  • Stay low on shuffles. Short, quick steps.
     

Common mistakes (and fixes):

  • Wide, sloppy turns: Place cones and rehearse the path.
     
  • Redline early: Breathe on a cadence. Save a kick for the last carry.
     
  • Wasted steps: Film one run to spot drift and extra steps.
     

Score it now:

Train it:

3.5 Plank (PLK) — Core Endurance That Transfers

What it tests: Anti-extension core endurance.
Core idea: Ribs down, glutes engaged, steady breath.

Fast technique cues:

  • Elbows under shoulders.
     
  • Pack your neck. Stare at the ground.
     
  • Breathe shallow and steady.
     

Common mistakes (and fixes):

  • Low hips: Reset your brace and glutes.
     
  • Head up: Keep a neutral neck.
     
  • Breath holds: Use repeat clusters to build time.
     

Score it now:

Train it:

3.6 Two-Mile Run (2MR) — Pace Wins

What it tests: Aerobic endurance and resilience.
Core idea: Even or slightly negative splits with relaxed form.

Fast technique cues:

  • Tall posture, quiet arms.
     
  • Light, quick steps.
     
  • Breathe rhythmically to stay calm.
     

Common mistakes (and fixes):

  • Too fast at the start: Use a watch. Open at goal pace or slower.
     
  • No pacing plan: Practice race pace repeats weekly.
     
  • Heavy shoes or odd surfaces: Train in the same gear and on similar surfaces.
     

Score it now:

Train it:

4) Choose Your Training Path (Time-Bound Plans)

You do not need a perfect schedule.
You need the next session and a clear goal.
Start here and scale up when you can.

Tip: After each week, run the matching event calculator.
See how your points move.
Adjust if needed.
Use All Calculators for quick checks.

 

5) Standards and MOS Context (What Your Role Demands)

Know your numbers.
Then think about your role.
Some jobs may expect stronger performance in specific domains.

Start with ACFT Standards.
If you need a quick check, use the ACFT Standards Calculator.
Then explore MOS-framed standards pages:

New to the Army?
Start with ACFT Resources for New Recruits.
Build a base and learn the test flow.

6) Regulations, Equipment, and Setup (No Surprises)

Train by the book.
Test with the same setup you practice on.
This keeps test day calm and predictable.

Also review site governance so you know who built the tools and how your data is handled:

 

7) The S.C.O.R.E. Method (A Simple Framework That Works)

This five-step loop makes steady progress feel easy.
Use it every training cycle.

S — Set a clear goal.
Open the ACFT Calculator Tool.
Pick a total score and event targets.
Write them down.

C — Check your baseline.
Run a light mock or single-event trials this week.
Log reps, time, and throws.
Confirm points with the event calculators in All Calculators.

O — Organize your blocks.
Choose a focus: strength, power, speed, or endurance.
Use the Beginner Program if you are new.
Short on time? Pick 2-Week or 4-Week plans.

R — Rehearse the test sequence.
Practice the exact order.
Drill transitions.
Do one full mock in the middle of your plan.

E — Execute and adjust.
Test, review, adjust.
Return to the calculators.
Move your focus to the next easiest points.

 

8) Quick Wins Most Soldiers Can Grab Fast

SDC:
Map the turns.
Shuffle low.
Pull the sled straight.
Use ACFT Sprint-Drag-Carry Calculator after practice to track seconds.

PLK:
Do short clusters with brief rests.
Breathe shallow.
Score gains with the Plank Calculator.

HRP:
Keep a straight line from head to heels.
Stop sets before form breaks.
Check points with the Push-Up Calculator.

2MR:
Open at goal pace, not faster.
Add one weekly threshold run.
See time-to-points with the Two-Mile Run Calculator.

SPT:
Practice rhythm with light throws.
Finish tall.
Track distance gains with the Standing Power Throw Calculator.

MDL:
Use strong bracing and small load jumps.
Confirm point moves with the Deadlift Calculator.

9) Test-Day Flow (Calm, Simple, Repeatable)

The night before:
Lay out gear.
Eat a normal meal.
Get as much sleep as you can.

Warm-up (10–15 minutes):
Light movement.
Hip and thoracic mobility.
Two short rehearsal sets for the first event.

During the test:
Follow the sequence.
Breathe on a rhythm.
Move on after each event.
Do not dwell on one mistake.

After the test:
Log results.
Open the ACFT Calculator Tool.
Plan your next cycle using the ACFT Training Hub.

 

10) Sample 6-Week Plan (Plug-and-Play)

Use this as a template.
Adjust days around duty, field time, and recovery.

Week 0 (Baseline):
Do single-event trials or a light mock.
Save numbers in the ACFT Calculator Tool.

Weeks 1–2 (Build skill and capacity):

  • Day 1: MDL technique + HRP clusters
     
  • Day 2: SPT rhythm + PLK clusters
     
  • Day 3: SDC path rehearsal
     
  • Day 4: 2MR race-pace repeats
     

Weeks 3–4 (Specificity and rehearsal):

  • Day 1: MDL strength + HRP volume
     
  • Day 2: SPT + PLK
     
  • Day 3: SDC full effort
     
  • Day 4: 2MR tempo run
     
  • End of week 4: Full mock test → check ACFT Standards Calculator
     

Weeks 5–6 (Sharpen and taper):

  • Day 1: Event skills at lower volume
     
  • Day 2: SDC + PLK short sets
     
  • Day 3: 2MR short race-pace blocks
     
  • Week 6 start: Final mock → light taper into test day
     

Short runway?
Swap in 2-Week Quick Improvement or 4-Week Quick Improvement as needed.

 

11) Complete Resource Index (Bookmark This)

Core tools and hubs:

Event calculators (A/B versions when provided):

Training programs and learning:

MOS-framed standards:

New soldiers:

Regulations, equipment, governance:

12) Human-Style FAQ (Clear Answers, Quick Links)

Q1) What is the fastest way to find my required scores?
Use the ACFT Standards Calculator.
Then confirm details on ACFT Standards.

Q2) I have two weeks. Can I still improve my total?
Yes.
Run the 2-Week Quick Improvement Plan.
Focus on SDC, PLK, and HRP for rapid gains.

Q3) I am brand new. Where should I start?
Read ACFT Resources for New Recruits.
Then follow the Beginner Program.

Q4) Which events give most soldiers the fastest points?
Usually SDC, PLK, and HRP.
Check progress after each session with All Calculators.

Q5) How often should I rehearse the full test?
At least once mid-plan and once near the end.
Use the ACFT Calculator Tool to compare totals.

Q6) What if my deadlift stalls?
Drop the load slightly.
Add tempo work and clean bracing.
Follow the 3-Rep Max Deadlift Training Program and track points with the Deadlift Calculator.

Q7) How do I pace the Two-Mile Run?
Aim for even or negative splits.
Practice race-pace repeats weekly.
Use the Two-Mile Run Calculator to translate seconds into points.

Q8) Where can I see the movements done right?
Watch the ACFT Training Videos.
Then practice with your unit’s setup.

Q9) What gear do I need for training?
Check the ACFT Equipment Guide.
Use the same or similar gear on test day.

Q10) Where do I read official rules?
See ACFT Regulations.
They summarize policy and link to source documents.

Q11) Who made these tools? Are they safe to use?
Read About ACFT Calculator for the team’s mission.
Review Terms and Privacy for details.

Q12) How do MOS pages help me?
They frame standards for your job.
Explore your role, like 11B, 13B, or 19D.
Browse all MOS cards on ACFT Standards.

Q13) Can I change my plan mid-cycle?
Yes.
Shift focus to the event with the best return.
Pick a matching block in the Training Hub.

Q14) What if I have four weeks?
Use the 4-Week Quick Improvement Plan.
Do one full mock at the end of week two.

Q15) How can I see everything in one place?
Open All Calculators for quick tools.
Use ACFT Standards for tables and MOS links.

13) Final Checklist (Print and Go)

 

14) Closing Thoughts (You’ve Got This)

You do not need a perfect week to pass the ACFT.
You need clear targets, short focused sessions, and two rehearsals.
Use the calculators to guide every step.
Pick a plan that fits your life.
Train with intention.
Show up calm on test day.
Then come back and set your next goal.

Start here: ACFT Calculator Tool
Continue here: ACFT Training Hub
Confirm here: ACFT Standards and All Calculators

Legal and Site Info

Business

How CRM Software Helps You Automate and Optimize Customer Engagement

AQ

As you strive to build strong, lasting relationships with your customers, you’re likely aware that manual processes and scattered data can hinder your efforts. That’s where CRM software comes in. By centralizing customer information and automating routine tasks, you can focus on what matters most – providing personalized, timely interactions that drive loyalty and growth. But just how can CRM help you achieve this? From streamlining customer interactions to informing data-driven decisions, the benefits of HubSpot CRM are vast and varied. Take the first step in transforming your customer engagement strategy – and discover the full potential of CRM.

Streamlining Customer Interactions

About 75% of customers prefer personalized interactions with companies, and streamlining customer interactions is crucial to achieving this.

You can’t afford to waste time on manual data entry or searching for customer information when you could be building relationships with your customers. CRM software helps you streamline customer interactions by providing a centralized platform for customer data and interactions.

With a CRM, you can access customer information instantly, track interactions, and analyze customer behavior. This enables you to tailor your interactions to each customer’s unique needs and preferences.

You’ll also be able to identify and respond to customer pain points more efficiently, leading to increased customer satisfaction and loyalty. By automating routine tasks and providing a 360-degree view of each customer, CRM software empowers you to deliver personalized experiences that drive business growth.

With streamlined customer interactions, you can focus on what matters most – building strong, lasting relationships with your customers.

Automating Task Management

Managing a high volume of tasks and deadlines can be overwhelming, especially when you’re dealing with multiple customers and projects simultaneously.

You’re constantly juggling meetings, calls, and emails, trying to stay on top of everything. But with CRM software, you can automate task management and free up more time for high-value activities.

You can set reminders and notifications for upcoming deadlines, ensuring you never miss a critical task or appointment.

The software also allows you to assign tasks to team members, track progress, and identify bottlenecks. This streamlines your workflow, reducing the risk of human error and increasing productivity.

Moreover, CRM software provides a centralized platform for task management, giving you a clear overview of all your projects and tasks.

You can prioritize tasks based on their urgency and importance, and make data-driven decisions to optimize your workflow.

Enhancing Personalized Experiences

By the time you’ve automated task management, you’re ready to focus on what really drives business growth: delivering exceptional customer experiences.

With CRM software, you can create personalized interactions that foster strong relationships and loyalty. You’ll have a 360-degree view of each customer’s history, preferences, and behaviors, allowing you to tailor your communications and offers to their unique needs.

You can segment your customer base based on demographics, purchase history, or behavior, and create targeted campaigns that resonate with each group.

CRM software also enables you to track customer feedback and sentiment, so you can identify areas for improvement and make data-driven decisions. By leveraging this information, you’ll be able to anticipate customer needs, provide proactive support, and exceed their expectations.

This personalized approach will help you build trust, increase customer satisfaction, and ultimately drive revenue growth. With CRM software, you’ll be able to deliver exceptional customer experiences that set your business apart from the competition.

Improving Response Times

With timely responses, you can make all the difference in turning prospects into customers and retaining existing ones.

When you respond quickly to inquiries, you demonstrate that you value their time and care about their needs. CRM software helps you achieve this by automating workflows and assigning tasks to team members.

This ensures that no inquiry or issue falls through the cracks, and you can respond promptly to every customer interaction.

You can also set up automated email responders to acknowledge customer inquiries and let them know that you’re working on their issue.

This helps manage expectations and reduces the likelihood of customers following up multiple times. Additionally, CRM software provides a unified platform for your team to collaborate and access customer information, enabling you to respond quickly and accurately to customer queries.

Data-Driven Decision Making

As you work to improve customer engagement, you’re likely sitting on a treasure trove of customer data that can inform your strategies.

CRM software helps you tap into this valuable resource, providing insights that can drive data-driven decision making.

With a CRM, you can analyze customer interactions, preferences, and behavior, identifying patterns and trends that can shape your engagement strategies.

Conclusion

You’ve now unlocked the secret to revolutionizing customer engagement with CRM software. By streamlining interactions, automating tasks, and enhancing personalized experiences, you’ll improve response times and make data-driven decisions. With CRM, you’ll exceed customer expectations, foster loyalty, and drive business growth. It’s time to take your customer engagement to the next level and reap the rewards of increased revenue and long-term success.

You Missed

Home & Kitchen Ideas

Common Carpet Cleaning Mistakes and How to Avoid Them

Other

Unveiling the Golden Glow Why Yellow Lab Diamonds Are Redefining Modern Luxury

Technology

The Role of Biotechnology Companies in Environmental Sustainability

Health & Fitness

Red Light Therapy for Hair Growth and Scalp Health

Automotive

Affordable Training for Automotive Professionals in Car Maintenance